Capabilities

Can you build my product?

The short version — the whole board, finished and traced. We place the hard stuff, down to 01005 and 0.3 mm pitch, and every unit is serialized and traced to the job and the process. Here’s what fits.

Certified to ISO 9001 (2003), ISO 13485, and IPC-A-610 Class 2 & 3.

Certified
  • ISO 9001:2015
  • ISO 13485:2016
  • IPC-A-610 Class 2 & 3
01 · What we build

A finished board — placed, inspected, coated.

Every step runs here, on one connected line — nothing farmed out, no handoffs between shops.

SMT → 100% AOI → Through-hole → Board-level mechanical → Final inspection → Conformal coating

Placement

Fine-pitch SMT to 0.3 mm, 01005 and BGA · double-sided · mixed technology with 1.5 mm selective solder.

Boards

Simple 2-layer to dense multilayer, plus rigid-flex and flex, sized from a dime to a full motherboard.

Finishing

The board-level mechanical that completes a board — standoffs, connectors, mounted hardware — plus automated conformal coating, all in-house.

Integration

When a build needs more than the board: light integration today — heat-shrink, thermal pads, simpler assemblies — growing as our MES opens the door to fuller builds.

Inspection

100% AOI on every assembly, with X-ray for profiling, sampling, and full inspection when a build calls for it.

Volume

One piece to thousands — built for high mix, from a single prototype to recurring production.

02 · Turnkey or consigned

However it arrives, we take care of it.

Run it turnkey and we buy and own every part — you know the drill. Or consign it. We’ll run traditional kits when necessary. But kits are challenging for both teams — parts shuttle back and forth, go missing, MSL control slips, mountains of manual labor. So we built a new way. Consign everything once — we fold your inventory into our system, run the MRP, and send you the report; you purchase against it and drop-ship. We handle the rest, traced lot-to-job, the same as anything we own. Keep it consigned — and never handle physical material again.

The full material model — how it flows and how we run it — is in Supply Chain.

SERIAL R-04412 PART C14 · 100nF SOURCE CONSIGNED REELS 4 Received drop-shipped in 2/12/26 Serialized SN per reel 2/12/26 X-ray-counted 4,812 pcs 2/13/26 Traced to job lot → WO-31547 2/14/26 Managed to consumption live to the last part LIVE The same record whether we bought it or you consigned it.
03 · How it’s controlled

Two systems track every part and every step.

Nothing here rides on a logo. Two systems keep the record — a live stockroom for your materials, an MES for your process — so a finished board can tell you exactly what went into it, and everything done to it. Data, not promises.

SERIALIZEDBOARDMATERIALSPROCESS
MaterialsEvery part, traced to its lot and job.

Every part is serialized, moisture-controlled, X-ray-counted, and traced lot-to-job — inventory live to the piece.

ProcessEvery unit, traced through every step.

Each unit records the operation, operator, and inspection at every step, and an MES interlock holds a board until that step is signed off.

PROGRAM PLAN NPI → SCALE PHASE CUSTOMER VAS 01 NPI final design changes DFM & BOM scrub 02 First article approve deviations build & test 03 Pilot tune the design dial in the process 04 Production release to build repeatable build 05 Scale hold the forecast ramp volume It takes both of us — all the way to scale.
04 · Engineering & NPI

We help you get to production.

Every job comes in the front door with a clear owner at each handoff — DFM feedback before you commit, and buying driven by MRP and software we built in-house, increasingly on one internal workflow. It’s the front-end that turns a new design into a repeatable build, with the attention a right-sized shop can actually give.

Quote → BOM scrub → Engineering → Purchasing

See the full front door in How We Build →

05 · At a glance

The spec sheet.

Everything above, in one place — for your team, your RFQ, or a side-by-side comparison. More detail in our FAQ.

VAS Engineering capabilities at a glance
CertificationsISO 9001:2015 · ISO 13485:2016 (IAPMO SCB)
WorkmanshipIPC-A-610 Class 2 and Class 3
VolumesOne prototype to recurring volume production · high-mix
SMT01005 · 0.3 mm fine pitch · BGA · single- and double-sided
Through-holeMixed technology · 1.5 mm selective solder
BoardsRigid, flex and rigid-flex · 2-layer to dense multilayer · up to 24 × 16 in (610 × 406 mm)
Inspection100% 4D AOI on every assembly · X-ray for profiling, sampling, and 100% when required
Programming & testIC programming · your functional test on your fixtures · fixture design and in-circuit test through partners
FinishingBoard-level mechanical · conformal coating · light integration, including enclosures
MaterialsTurnkey · traditional consigned kits · consign‑once · partial consignment
TraceabilityUnit-level process records (MES) · lot-to-job materials
IndustriesMedical devices · commercial aerospace · industrial controls · test and measurement · energy · communications
LocationAssembled in-house in San Diego, CA · since 1987
Not offeredPCB design or layout · flying-probe test · ITAR work
Accelerating America’s
electronics future

Bring us your build.

Tell us about the program or board — we’ll tell you quickly whether it fits, and what it takes to build it right.