Straight answers about what we build, how we work, and whether we’re the right fit — from a San Diego contract manufacturer that’s been building boards since 1987.
VAS Engineering is a contract electronics manufacturer in San Diego, California. We build printed circuit board assemblies (PCBAs) for product companies (OEMs) in medical devices, commercial aerospace, industrial controls, test and measurement, energy, and communications — from a first prototype to recurring volume production — entirely in-house at our facility on Viewridge Ave. We’ve been doing it since 1987.
Yes. VAS Engineering is certified to ISO 13485:2016 (medical devices quality management) and ISO 9001:2015, both issued by IAPMO SCB. Both certificates are posted on this site. We build to IPC-A-610 Class 2 and Class 3. Certification covers our quality system — it isn’t an approval of your device.
Companies with recurring products — whether that’s several product lines or a single product built from five boards — that reorder on a schedule, in medical devices, commercial aerospace, industrial controls, test and measurement, energy, and communications. We’re built for high-mix, recurring production: the same build, to the same standard, every time. When those same customers need boards fast, we run quick turns too. We also take new products that are headed for production.
Every board is assembled in-house at our San Diego facility, by a team of about 50 people — we never subcontract assembly. Components and bare-board fabrication can be sourced locally or globally, based on each customer’s requirements, cost and availability.
We place components down to 01005 and 0.3 mm fine pitch, including BGAs, on single- and double-sided boards. Mixed-technology builds (SMT plus through-hole) run through 1.5 mm selective solder. We build rigid, flex and rigid-flex boards, from simple 2-layer to dense multilayer.
From a single prototype to recurring production volumes. Our sweet spot is high-mix, recurring programs — and if a program grows, our systems let us scale capacity to the same standard. See how we build →
Up to 24 × 16 inches (610 × 406 mm).
Every assembly gets 100% 4D automated optical inspection (AOI). We use X-ray for process profiling and sampling, and for 100% inspection when a build requires it. We program ICs and run your functional test using your fixtures and software — and when you need fixtures designed or in-circuit test, we work with trusted partners. We don’t offer flying-probe test.
We do board-level mechanical assembly — standoffs, connectors, hardware — plus light integration: fasteners, heat shrink, thermal pads, adhesives and installing boards into enclosures. Full box build is growing; tell us about your product and we’ll tell you straight whether it fits.
No. You own the design; we engage at new product introduction (NPI) with a design-for-manufacturing review and a BOM scrub, then carry the build through first article, pilot, production and scale. Need design help? We introduce customers to design partners we know and trust all the time — it’s a normal part of how we work, and we enjoy building alongside them.
Both. Turnkey: we buy and own every part. Consigned: we run traditional consigned kits — or our consign-once model, where we fold your inventory into our system, run MRP and send you the report; you buy against it and drop-ship, and we manage every part to final consumption. Partial consignment works too.
Every BOM line is checked at the quote against your previous builds, then priced across hundreds of suppliers in one pass — flagging obsolete, long-lead and allocation risks up front. Live stock and MRP surface shortages weeks out, not when the line stops. See how our supply chain works →
Our MES records every step, operator and inspection for each serialized unit. Materials are traced lot-to-job: which lot and supplier went into which build. When an audit or a field failure needs the history, we trace it end to end in seconds. See how we build →
Gerbers, a BOM with manufacturer part numbers, assembly drawings, and your quantities or forecast.
Typically within 1–3 business days, including a full review of your BOM.
Yes — for the companies we build for, when they need boards fast. We’re not built to be a three-day shop for a board we’ll never see again; we’re the partner that walks you to production. So when a build needs to move quickly, we move with you through every iteration — while still leaving room for the NPI steps that make every build after it go right. Tell us your date and we’ll tell you straight what’s possible.
Yes. When a revision changes, we re-sequence the work and update the build records, so the change flows through our systems instead of through email.
Yes — book a floor tour on our Contact page. One tour is usually all it takes to see how we work.
Yes — whichever is easiest for you. We’ll sign your NDA or send ours, and it’s in place before you share a single file.
Ask us directly — or walk the floor and see the answers for yourself.